8mm duotight - (No Gauge) Inline Regulator with Yellow Adjustment Handle

8mm duotight - (No Gauge) Inline Regulator with Yellow Adjustment Handle

This new line comes with 8mm (5/16") push in connectors so you can push your beer, water, gas line directly into the unit.

This new design has two features:

1. New 8mm Push In
This new line comes with 8mm (5/16") push in connectors so you can push your beer, water, gas line directly into the unit.  No need for hose clamps, just push your Evabarrier 4mm or Evabarrier 5mm Directly into the connector and it's securely joined.

2. Handy Tee Bar Adjustment
These now have been designed with a highly visable yellow tee bar adjustment knob.  Signficiantly easier than the old design that required a phillips head screw driver to adjust the pressure.

Constructed with Non-Corrosive Acetyl, Nitrile & Stainless Components. The Regulator body has two wall mounting points.

Have a look at our wider range of duotight 8mm range  push in fittings if you need other stuff.

These regulators work great for reducing your mains pressure from 0-159psi. The maximum inlet pressure is 150psi. Use another larger gauge inline to adjust to a known pressure. Then remove (set and forget).