Duotight Fittings
Code: GEB4497
duotight - 3/8" Female x 1/2" Female ThreadThe duotight 9.5mm (3/8") Female × 1/2" Female Thread Adapter gives you a secure, leak‑free way to connect 3/8" EVABarrier tubing to any 1/2" threaded fitting. Whether you’re adapting to pumps, chillers, filters, or water‑inlet hardware, this fitting delive..
£1.06
Ex Tax:£0.88
Code: GEB4563
Duotight - BlowTie 2 with Integrated Gauge 0-15psiThis kit has been designed for simplicity and ease of putting together. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.The adjustment ..
£11.96
Ex Tax:£9.97
Code: GEB4478
Duotight 6.35mm (1/4") x Ball Lock Disconnect - (Grey + Red Gas)The humble plastic ball lock disconnects have been around a long time and are used by thousands of home brewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to c..
£6.37
Ex Tax:£5.31
Code: GEB4177
Duotight 8 mm Filter System 100 meshThe filter is designed to remove larger particles easily and efficiently, which can help protect your brewing equipment. It can also be used as a home inline water filter.It can also be used as a light-duty keg-to-keg hop filter. Just ensure you have cold crashed ..
£4.78
Ex Tax:£3.98
Code: GEB3165
Duotight Blowtie Spunding Valve for 0-4 bar/0-60 PSI
Adjustable Blowtie Spunding Valve for 0-4 bar/0-60 PSI, with Duotight fittings for 8 mm tube. Easy to adjust precisely. Set the desired venting pressure. Perfect for FermZilla, Kegmenter and Cornelus kegsWith built-in manometer...
£10.42
Ex Tax:£8.68
Code: GEB4117
Duotight Bulkhead 8 mm - 1/4" with SS NutThis fitting is ideally used with Twister Cooling / Heating coil 3/8" - 1/2"..
£4.18
Ex Tax:£3.48
Code: GEB3792
Duotight Bulkhead 8 mm - 1/4" with SS NutThis fitting is ideally used with the 60cm Stainless Steel Thermowell for use in the FermZilla Range, Kegmenter range or even drilled into an HDPE fermenter.
If you do not wish to use it for a thermowell purpose, this fitting can be used with the EVABarrie..
£3.59
Ex Tax:£2.99
Code: GEB4655
Duotight Gen 2 - 8mm (5/16) adhesive wall clipThe duotight 8mm Adhesive Mounting Brackets give you a simple, drill‑free way to mount duotight manifolds and fittings inside your kegerator or keezer. Each bracket can swivel after installation, letting you position your manifold at the perfect angle ev..
£1.72
Ex Tax:£1.43
Code: GEB3392
Duotight Straight Connector 3/8" to 3/8" (9.5 mm to 9.5 mm)
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing.Duotight fittings are high-quality push-in fittings that seal tight and
offer superior sealing capacity due to the double O-ring sealing
design.
High Per..
£5.20
Ex Tax:£4.33
Code: GEB3400
Duotight Straight Reducer 8 mm to 6.5mm
Straight Reducer 8 - 6,5 mm (5/16"-1/4")
Reduces beer- and gas line from 8 to 6,5 mm.
Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.High-Performance..
£5.20
Ex Tax:£4.33
Code: GEB3397
Duotight T Piece Connector 8mm
The duotight T Piece Connector (8mm) is a compact, high‑performance push‑fit fitting designed for splitting or combining gas or beverage lines with total reliability. Built with duotight’s signature double EPDM O‑ring sealing system, this T‑piece offers twice the sea..
£5.20
Ex Tax:£4.33
Code: GEB3393
Duotight Tap 3/8" (9.5mm)..
£3.48
Ex Tax:£2.90
Code: GEB3404
Duotight Tap Adaptor - 3/8" to 5/8"3/8" push-fit to 5/8' female thread Duotight
fittings are high-quality push-in fittings that seal tight and offer
superior sealing capacity due to the double O-ring sealing design.High-Performance Double O-Ring Design:The
secret to Duotight’s superior sealin..
£5.30
Ex Tax:£4.42
Code: GEB3402
Duotight Threaded 1/4" - 8 mm (5/16)The duotight Threaded 1/4" FFL × 8mm (5/16") Straight Adapter gives you a clean, reliable way to connect 8mm EVABarrier tubing to any 1/4" FFL threaded fitting. It’s the lightweight, corrosion‑resistant alternative to metal push‑fit adapters — perfect for gas mani..
£3.43
Ex Tax:£2.86
Code: GEB3403
Duotight threaded 7/16" - 3/8"
The duotight Threaded 7/16" × 3/8" Adapter gives you a secure, leak‑free way to connect 3/8" EVABarrier tubing to any 7/16" threaded fitting. Whether you're adapting to beverage hardware, inline components, or specialist fittings, this connector delivers a clean, re..
£3.73
Ex Tax:£3.11
Code: GEB4569
Integrated Gauge BlowTie Kit (0-15psi)Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas)This kit has been designed for simplicity and ease of putting together. All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in ..
£13.87
Ex Tax:£11.56
Code: GEB4485
Monotight - 6.3mm (1/4”) Female x 6.3mm (1/4”) Female One Way Check Valve (Gas/Water)The Monotight 6.3mm (1/4”) Female × 6.3mm (1/4”) One‑Way Check Valve is a compact, reliable safety fitting designed to protect your regulator and prevent unwanted backflow in gas or clean‑water systems. With a low o..
£1.38
Ex Tax:£1.15